The following catalog products are recommended for new applications. If the
product required is not shown, we may have a customized product for your
application. Please contact your CTS Representative for availability.
These products are covered by one or more of the following U.S. and/or foreign
US 5,977,863; TW NI-133,148; US 6,005,777; US 6,194,979; US 6,246,312; US
6,326,677; US 6,856,516; US 6,882,266; US 6,897,761; US 6,946,733; US 7,180,186
These LVPECL and LVDS
termination networks are designed for high performance termination of
differential Input/Output signals on some of the most popular Field
Programmable Gate Arrays (FPGAs). Designed for termination of Xilinx®
and Altera® FPGAs. 8 or 16 differential channels of termination provided in
a single integrated package.
This Resistor/Capacitor terminator network provides high performance
Designed with a ceramic substrate, this device virtually eliminates channel
capacitance, a primary cause of reduced system performance. In
addition, the BGA package eases routing design, saving the designer many
hours of printed circuit layout.
ClearONE Topside Probable Diagnostic Parts
Topside Probable Parts
In general, all ClearONE designs can be made available in Top Probe-Able
versions upon request. Many of the standard products are available
off-the-shelf, but your local CTS ClearONE representative should be
contacted for specific device ordering and availability details.
Figure 1 describes the proper numbering to convert a standard ClearONE part
number to the Top Probe-Able version. (See Topside Probable
Application Note for more information.)