|
|
CTS Electronics Manufacturing Solutions
Londonderry, NH, USA
Contact
Address
34 Londonderry Road
Londonderry, NH 03051
USA
(Tel): 603-421-2546
(Fax): 603-421-1763
Sales Contact
Anthony Lautieri
Anthony.Lautieri@ctscorp.com
Phone: 603-421-3109
Londonderry Capabilities
CTS Londonderry is an NPI and volume fulfillment operation, supporting
customers in a range of high technology markets, with PCB assemblies, backplanes
and fully configured box build systems. The operation is also a Medical Center
of Excellence, specializing in supporting customers with a range of medical
device and equipment needs.
New Hampshire manages medium to high volume, low to high mix programs and is a
center for repair services. The site also offers new product introduction and
rapid prototyping services, called EMS Express™.
Medical Center of Excellence
As well as high technology support, New Hampshire also offers specialist
medical EMS services to customers. These include lot traceability, separate
manufacturing area, documentation control and clinical trial support, repair
services and GMP, 21 CFR Part 820. For more information, contact
Anthony.Lautieri@ctscorp.com .
EMS Express™
EMS Express™ is a rapid prototyping service. Customers benefit from
dedicated prototyping services, capital equipment and resources to
accommodate SMT and Thru-Hole assembly of PCBs and flying probe, X-ray
and automated optical inspection (AOI).
| Size: |
73,000 sq ft |
Quality Certifications: |
AS9100
Aerospace
ISO13485 Medical
GMP, 21 CFR Part 820
ISO9001-2008
ANSI-J-STD-001
IPC Class III Workmanship
ITAR |
| Market Focus: |
Medical Devices &
Equipment
Defense & Aerospace
Homeland Security
Industrial Equipment
Renewable & Clean Energy
Communications Infrastructure |
| Services: |
Medium to
Ultra-High PCB Assembly |
| |
|
Double-Sided, 20" x 24" Max
Geometry |
| |
High Level Box Build Integration |
| |
|
Medical Box Integration
Ruggedized, Harsh Environment |
| |
BGA & µBGA
Assembly, Flip Chip
Cable & Harness Assembly
NPI Center & EMSExpress© services
Repair Center
Lot Traceability
Lean Six Sigma
Product Design Support |
| |
|
Concept Design & Development
DFx – Manufacturing & Test
Test Program Development
PCB Design & Layout
Electro-Mechanical Design
Thermal Analysis |
| |
Test Engineering &
In-House Test Services |
| |
|
Automated Optical Inspection (AOI)
Flying Probe
In-Circuit Test
Hi-Pot Test
X-Ray Inspection |
| |
Program Management
Supply Chain Management
Logistics and Direct Ship |
| |
|
|
|
